Summer is coming in Australia and South Africa, and with it the same complaint every year: the TMR is hot in the bunk by midday and the cows won’t touch it. Heat in the bunk is feed going backwards. Here’s how to slow it down.
Why feed heats
Once silage is exposed to air, yeasts and moulds start working. They burn the sugars and produce heat. In summer, they work faster. A mixed ration with silage and wet by-products can heat quickly in the bunk, especially if it’s been sitting for hours.
Start at the silage face
- Remove a clean, tight face every day.
- Take enough off the face that it moves fast in hot weather.
- Don’t leave loose silage lying around the pit.
- Use a facer or a clean bucket technique to avoid loosening the face.
- Load the mixer straight from the face, not from a pile left overnight.
Smaller loads, fed more often
One big load in the morning sits in the bunk all day. Two or three smaller loads keep the feed fresher. It costs some extra tractor time, but cows eat more and waste less. Check the smaller loads are still above your mixer’s minimum.
Feed in the cool of the day
Cows eat less in the hottest part of the day. Feed more in the early morning and evening. Push up feed often during cooler hours. Shade over the bunk helps if you can manage it.
Watch moisture
Very wet rations heat faster. If you add water to reduce sorting, add only what the ration needs. Check silage dry matter, which can change quickly after rain.
Wet by-products
Brewers grain and other wet by-products are useful but can heat fast. Store them carefully, use them fresh, and add them late in the load.
Clean the bunk
Old feed left in the bunk starts the heating process for new feed. Clean out refusals every day before feeding.
Track refusals
Weigh what’s left before the next feed. If refusals jump on hot days, look at timing, freshness and load size before changing the ration.
Mixer habits that help
- Don’t overmix. Mix long enough after the last ingredient.
- Clean the tub. Feed left in corners heats and contaminates the next load.
- Keep knives sharp so mixing is quick.
A well-set vertical mixer like the VT Series mixes quickly, which helps keep feed fresh. Smaller herds may suit the mini mixers for frequent small loads.
Water and shade
Cows that can’t drink won’t eat. Check water troughs are clean, full and close. Shade over troughs and bunks reduces heat stress.
Quick questions
Can additives help? Some farms use preservatives on silage or in the ration. Ask your nutritionist.
How do I know feed is heating? Feel it. A thermometer helps. Warm feed and a sour smell are signs.
Should heifers get the same care? Yes. They also eat less in heat.
From the show floor
Every summer I hear from farmers whose milk drops in a heatwave. Many already feed well. The fix is often just smaller, fresher loads and a cleaner silage face.
Planning ahead for next summer
When you make silage, think about summer feed-out. A narrower face that moves faster in hot weather heats less. Good packing and sealing at harvest pay off months later at the bunk. Write down what worked this summer while it’s fresh.
Signs your plan is working
- Feed in the bunk stays cool to the touch into the afternoon.
- Refusals stay steady on hot days.
- Cows come to the bunk after each feeding.
- Milk and intake hold through heatwaves.
The short version
Clean silage face, smaller loads fed in cool hours, clean bunks and watch refusals. Talk to a LEO dealer about mixer setup for summer feeding, and read about drought hay and mixer process time.
Learn more about LEO Agriculture and our full line of feed mixers and manure spreaders.
