You are currently viewing Mixing Wet Silage and Dry Hay: Moisture Targets for a Stable TMR

Mixing Wet Silage and Dry Hay: Moisture Targets for a Stable TMR

Silage moisture never stays put. Rain, a new face in the bunker, a different cut. The cows eat the same weight of feed, but they get a different amount of dry matter. Mix wet silage and dry hay together without watching moisture and your ration drifts week by week.

Why moisture matters

Animals need nutrients on a dry matter basis. If your silage gets wetter and you keep loading the same as-fed weight, they get less dry matter. Less dry matter means less energy and protein. You’ll see it in milk or gain before you notice in the yard.

TMR moisture targets

Your nutritionist sets the target dry matter for your ration. Many TMRs land in a moderate moisture range, but the right number depends on the ration and the animals. Too dry and animals sort. Too wet and intake can drop and feed heats in the bunk.

Check silage dry matter often

  • Weekly at least, more often after rain or when you move to a new part of the pile.
  • A microwave or a moisture tester gives you a quick number.
  • Send samples to a lab periodically.

Adjust the loading

When silage dry matter changes, the ration’s as-fed weights need to change too. Your nutritionist can give you the adjustment, or a spreadsheet that does it. Then load to the new weights.

That’s where a good scale system earns its keep. The operator loads to the number on the screen.

Mixing wet and dry together

  • Load dry hay first and process it.
  • Add wetter ingredients after.
  • Add water or liquids last if the ration calls for them.
  • Mix only as long as needed. Wet rations can get pasty with overmixing.

Watch the bunk

  • Feed heating up quickly in warm weather: likely too wet or not fresh enough.
  • Long stems left behind: sorting, often too dry or poorly processed.
  • Clumps of wet feed: liquids added too early.

Why moisture matters

Moisture changes everything in the mix. A ration that’s too dry lets cows sort the fine, tasty bits from the long stems. A ration that’s too wet can heat up in the bunk, clump in the mixer and stick to the tub walls. The right moisture helps the fine material stick to the forage so every bite looks the same.

Checking silage moisture

Silage moisture changes as you move through a pile or bunker, and after rain. If you load by weight and moisture goes up, you’re actually feeding less dry matter. Check dry matter regularly. A simple farm test with a microwave or a forage moisture tester works. Do it weekly at least, more often after weather changes.

Adjusting the ration

When silage gets wetter, the as-fed weight needs to go up to keep dry matter the same. When it gets drier, it goes down. Your nutritionist can give you a simple way to adjust load sheets. Many scale indicators let you change ingredient weights quickly.

Adding water

Some dry rations benefit from added water to reduce sorting. Add it late in the load and spread it across the tub. Don’t add more than the ration needs. Wet feed spoils faster in hot weather.

Mix order for wet and dry

Hay and dry forage in first so the knives can work. Concentrates next. Wet silage later. Liquids last. This keeps wet material from coating the dry and stops clumping.

Signs moisture is off

  • Cows sorting and leaving long stems.
  • Feed heating in the bunk.
  • Clumps and balls in the mix.
  • Feed sticking in the tub corners.

Fix moisture and many of these go away.

Quick questions

What’s the right moisture for a TMR? Your nutritionist will set a target for your ration and animals.

How quickly does silage moisture change? It can change within days after rain or a new face. Test often.

Do I need an expensive tester? A microwave method is cheap and works well when done carefully.

What if cows still sort? Check particle length and knife sharpness. Moisture is only part of the answer.

Keep it simple

Measure, adjust, load to weight. Same routine every week. A VT twin auger mixer with accurate scales makes that routine easy.

Bottom line? Silage changes. Your load sheet has to change with it.

Learn more about LEO Agriculture and our full line of feed mixers and manure spreaders.