You are currently viewing Feed Mixer for a 300 Cow Dairy: Sizing, Loads per Day and Tractor Fit

Feed Mixer for a 300 Cow Dairy: Sizing, Loads per Day and Tractor Fit

A 300 cow dairy sits in a tricky spot. Big enough that feeding takes real hours every day, small enough that every machinery dollar gets watched. Get the mixer size right and you’ll feed faster for years. Get it wrong and you’ll fight it every morning.

Start with your groups

Most 300 cow dairies feed several groups: fresh cows, high producers, later lactation, dry cows, and often heifers. Write down how many animals are in each and how much each gets per day, as fed. Multiply to get the daily weight per group.

Measure your density

Two rations with the same weight can take up very different space. Measure yours:

  1. Use a container of known volume, like a clean drum.
  2. Fill it with freshly mixed ration, level, without packing.
  3. Weigh it and subtract the empty weight.
  4. Divide weight by volume.

Do it for each ration. Dry cow rations with more straw are often much bulkier than milking rations.

Work out loads

Decide how many times you’ll feed each group per day. Divide the daily weight by that number for the weight per load. Divide by density for volume per load. Add room on top so the feed can roll.

Now look at your biggest load and your smallest. The mixer has to hold the biggest and still mix the smallest properly.

The minimum load problem

On a 300 cow dairy, the fresh cow or dry cow group can be small. If that load is below the mixer’s minimum, mixing suffers. Options:

  • Combine the group’s load with another feeding.
  • Feed that group once a day instead of twice, if your nutritionist agrees.
  • Use a small second mixer for small groups.

Single or twin auger

At this size, many farms look at twin auger mixers because they handle bigger loads evenly. A single auger may suit if loads are moderate and you feed more often. LEO’s VT Series covers 6 to 21 cubic metres with twin augers. Bring your load numbers to the dealer and ask which size fits both your biggest and smallest load.

Tractor fit

Bigger tubs need more power, especially for bale processing. Check your tractor’s power, hitch and brakes against the loaded mixer. Think about your worst day: muddy yard, frozen bales, slope by the feed pad.

Loads per day and labour

Count total loads and time each one: loading, mixing, travel, unloading. Multiply out. If feeding takes too many hours, a bigger mixer, faster loading or better layout can help. Often loading is the bottleneck. See how loader height caps your tonnes per hour.

The scale matters at this size

Small errors across many loads add up fast on a 300 cow dairy. Make sure the scale is accurate and the loader driver can see it. Read more on scale systems and feed costs.

Plan for growth

If you plan to milk more cows in a few years, put that into the numbers now. Buying slightly bigger can save buying again soon, as long as today’s smallest load still mixes well.

Quick questions

Should heifers come off the same mixer? Often, if loads are above the minimum.

How many loads a day is normal? It varies a lot. Work from your own groups and times.

Is a truck mixer worth it? At 300 cows with short distances, usually a trailed mixer is plenty.

Feed layout

Look at where commodities sit compared with the mixer path and the barns. A short loop from silage face to commodity bays to the feed alley saves minutes every load. On a 300 cow dairy that adds up to hours each week. If you’re rebuilding a feed pad, plan the bays around the mixer, not the other way around.

Who runs it

Train everyone who feeds. Same load order, same targets, same mix time. Consistency across operators matters as much as the machine.

The short version

List groups, measure density, size for your biggest load, and check your smallest. Match the tractor and time the loading. Bring your numbers to a LEO dealer and get a size that fits both ends.

Learn more about LEO Agriculture and our full line of feed mixers and manure spreaders.