You are currently viewing How Much Does a Manure Spreader Cost? New, Used and Hire Compared

How Much Does a Manure Spreader Cost? New, Used and Hire Compared

“What’s a spreader cost?” depends on what you’re comparing. A new machine, a used one, or paying someone to do it. Each has a place. Here’s how to think about manure spreader cost properly.

New

Upfront: the highest. Depends on size, type, beaters, axle and options.

Upside: warranty, reliability, you spread when you want.

Running costs: wear parts, maintenance, tractor time, fuel, insurance.

Used

Upfront: lower.

Risk: worn floor chains, beaters, gearboxes and rusted floors. Repairs can eat the saving.

Check: floor condition, chain and slats, beater teeth, bearings, gearbox, axle and tyres.

Hire or contractor

Upfront: none.

Cost: per hour, per load or per hectare.

Downside: you spread when the contractor is free, not when conditions are best.

The break-even maths

  1. Estimate yearly ownership cost: purchase price spread over years of use, minus resale, plus maintenance, insurance, and interest or opportunity cost.
  2. Add running costs: fuel and tractor time per load.
  3. Compare with what a contractor charges for the same volume.

If you’re spreading a lot, owning usually wins. If you spread a few days a year, hiring often makes more sense.

We ran a detailed version of this in this custom rates vs ownership piece.

Hidden value of owning

  • Timing. Spread when soil and weather are right. That can improve nutrient use.
  • Flexibility. Clean pens when you need to.
  • Less compaction if you can spread in better conditions.

Hidden costs of owning

  • Wear parts and repairs.
  • Storage.
  • Tractor and labour time.

A worked break-even example

Here’s a simple layout for the maths. Put your own numbers in.

  • Purchase price of the spreader.
  • Expected years of use.
  • Expected resale value at the end.
  • Yearly maintenance and parts.
  • Insurance and interest cost per year.

Yearly ownership cost = (price minus resale) / years + maintenance + insurance and interest.

Now add your running cost per load: tractor time, fuel and labour.

Then get a contractor quote for the same work, per load or per hour.

Divide your yearly ownership cost by the number of loads you spread in a year, add the running cost per load, and compare with the contractor’s price per load. The point where they cross is your break-even number of loads.

If you spread fewer loads than that, hiring is cheaper. If you spread more, owning usually wins.

Things that don’t show up in the maths

Timing. If the contractor can’t come when conditions are right, you might spread on wet soil or miss a window. That costs yield and nutrient value.

Flexibility. Owning means you can clean a pen today instead of next week.

Wear on your tractor. Owning means more hours on your own tractor.

Used spreaders

Used can work. Check:

  • Floor and walls for rust and thin spots.
  • Floor chain, slats and sprockets.
  • Beater teeth, bearings and gearboxes.
  • Axle, hubs, tyres and brakes.

Price the repairs before you price the spreader.

Sharing ownership

Some neighbours share a spreader. It can work if you agree on timing, maintenance and who pays for what. Write it down.

Questions for the dealer

  • What’s the price for the size I need?
  • What do common wear parts cost?
  • What tractor does it need?
  • What’s the warranty?

Running costs that add up

Fuel, tractor hours, labour, and wear parts. Floor chains and slats, beater teeth, bearings, and tyres. These are the costs that make or break the own vs hire decision. Ask your dealer for prices and expected life for each.

Hire options

  • Contractor with spreader and tractor: easiest, but timing depends on them.
  • Hire spreader only: you supply tractor and labour.
  • Share with a neighbour: lower cost, needs good agreement.

When owning pays

  • Lots of manure every year.
  • Short spreading windows.
  • Pens or barns that need regular cleaning.
  • Contractors are hard to book in your area.

When hiring pays

  • Small volumes.
  • Spreading a few days a year.
  • Limited tractor or labour.
  • Cash is tight.

The short version

There’s no single right answer. Do the maths with your own numbers, think about timing, and pick the option that gets manure on the field at the right time for the least cost.

Getting real prices

Prices change with steel, currency and freight. Ask a dealer for a current quote, and for the price of common wear parts. See LEO rear discharge spreaders.

Bottom line? Do the cost per load maths. Then decide.

Learn more about LEO Agriculture and our full line of feed mixers and manure spreaders.